What is the relationship between the motor and the reducer

A geared motor refers to an integrated body of a reducer and a motor (motor). Such an integrated body may also generally be referred to as a gear motor or a gear motor. Generally, a professional reducer manufacturer will supply it as a complete set with the motor after it is integrated and assembled.

1) Reduce the speed and increase the output torque at the same time. The torque output share is multiplied by the motor output multiplied by the reduction ratio, but be careful not to exceed the additional torque of the reducer.

2) Deceleration reduces the inertia of the load at the same time, and the reduction of inertia is the square of the reduction ratio. You can see that the general motor has an inertia value.

Gearbox use

1. Speed up the deceleration: It is often referred to as a variable speed gearbox.

2. Change the transmission direction: for example, we use two sector gears to directly transmit the force to the other rolling shaft.

3. Change the rolling torque: under the same power conditions, the faster the gear rotates, the smaller the torque the shaft will receive, and vice versa.

4. Gathering and dispersing function: We can achieve the purpose of separating the engine from the load by separating the two originally meshed gears. Such as brake clutches etc.

5. Power distribution: For example, we can use one engine to drive multiple slave shafts through the main shaft of the gearbox, and then realize the function of one engine driving multiple loads.

As an important accessory of the motor, the planetary reducer has good data in all aspects. Generally, customers should ask the data clearly when inquiring, and professional technicians should also install it when installing. Otherwise, the data is wrong, or the device is not good, and it will cause mechanical problems in the later stage, which will affect the later work, so the gain will outweigh the loss.